Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

09.06.2025 05:04

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The bolt then partially travels down the line to your home.

But it can get overloaded, and no longer works.

eight

Why is crypto crashing today? ‘You have absolutely no idea what you own’ - AMBCrypto

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

It also is a device that limits the change in current flow.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

What is the reason that Worcester, Massachusetts is not as well-known as Boston and Springfield, even though it is a large city with many neighborhoods?

Because the load is inductive, the current lags the voltage.(by a bit).

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

For this case there are devices called Metal oxide varistors (MOV).

Why is Canada letting too many Indians in Canada?

He then describes Rainy Season and Lightning.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This one hit behind the barn.

Are you worried that the 2024 US presidential election will result in a close race?

What does a fuse do?

Here is a simplified AC power diagram.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

A Japanese lander crashed on the Moon after losing track of its location - Ars Technica

The other is “what does a “fuse” do?”

These are simplified answers to the original question, and does not change anything I wrote above.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Deals for Today: The Latest MacBook Air is Already Discounted, Cheap Controllers, and Big Savings on Father’s Day Gifts - IGN

In schematic diagrams this is the symbol for a fuse:

Upvotes:

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Diddy Bashes Courtroom Artist for Making Him Look Like a ‘Koala’ - The Daily Beast

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It seems Mohan does not understand the difference between a comment and an Answer.

This is 'the assistant's answer'

Subway owner buys mega-popular chicken chain in $1 billion deal - AL.com

There are two important concepts here.

the problem then depends on "how fast does the fuse operate?".

There are three different concepts here that are getting confused.

Flawless Finish: LSU Shreveport Makes History with Perfect Season and First NAIA Title - lsusathletics.com

Can the fuse protect the electronic devices from lightning instead of a surge protector.

So, the voltage could go up to 500 volts, and the fuse will not open up.

One

Why do I feel like I want to suck a big dick after injecting meth?

But… the neutral is now “floating” because of the 1 ohm resistance.

Now when you have a certain ac resistance, then a current flows in a loop.

The third is lightning and “how it gets conducted into a home.”

Why are right-wing commentators spreading conspiracy theories about Haitians eating local pets in Springfield, Ohio?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

[image of Common-mode choke]

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Summer rentals in the Hamptons are down 30% - CNBC

a photo is worth a thousand words.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

2024–10–10[John johnson John Johnson ]

What's it like to have an IQ of 140 to 170? Do people notice you're different?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

What are some dirty secrets of Indian (Bollywood, etc.) actors and actresses?

He then asserts :

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

A circuit breaker is similar, but is resettable.

2024–10–16 [ OO OLAOYE OYEBODE ]

The MOV will conduct when the voltage exceeds 50% of line voltage.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

At least they know the answer if they wanted it.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

I post the exact comment here.

(Dc diagram shown, AC is similar).

First Sentence:

These devices are installed between the “hot” and “neutral” and protective ground.

This is where this question deviates from being a 'generic' question, and becomes more specific.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

what exactly is a ‘surge’ protector?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Barnstars:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

so, what happens?

One is “what exactly is in a ‘surge protector’ ? ”

[old diagram got deleted by accident]

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

but I think this circuit , shows a few more pieces.

but this device (an Inductor) … impedes the rapid changes in the current.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

At one ohm, the resistor has a maximum of 1 watt power.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

This is where the MOV conducts again, and dissipated the energy.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

This device then solves the entire problem.

Edit 2024–10.

A fuse is a non-resetable over current circuit protector.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

What is lightning?

An AC voltage/ current source, and an ac inductive load.

He then describes the function of a fuse.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

nine

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”